What are the precautions before starting the natural gas generator? I believe most people still have questions about this. Let’s let Weifang natural gas generator manufacturer Xiaobian take you to understand the precautions before starting the natural gas generator.
Before starting the natural gas generator set, first open the air supply valve and check whether the pipeline connection is reliable If the surge tank is installed in the pipeline of diesel engine accessories, the blowdown valve at the bottom shall also be opened to discharge the dirt in the surge tank, exhaust the air and close the blowdown valve Fill the oil in the oil pan to the specified oil level, fill the cooling system with coolant, and check whether the circuit connection of the electric system is correct and whether the battery power is sufficient Check the air circuit.
Check whether the indication of the pressure gauge on the gas pipeline is normal, open the inlet valve of the natural gas generator set and turn on the power switch Start the engine with the governor idle rating switch at idle speed When the oil temperature and water temperature rise to 45 ℃ and 70 ℃ respectively, and the oil pressure is higher than 0.245Mpa, raise the of the natural gas generator set to high-speed operation.
Diesel engine accessories for new engines or natural gas generator sets that have not been used for more than 5 days, turn the crankshaft for 3-5 revolutions before starting For the natural gas generator set normally parked for emergency use, in order to facilitate the rapid start-up and operation in case of emergency, the test run shall be conducted every 3-5 days during the parking period until the water and oil temperature reach more than 60 ℃.
Post time: May-30-2022