There are some precautions for operating the gas generator set. When we use it, we often neglect the inspection before operation because we are familiar with the operation process. In fact, it is necessary to check before operating the gas generator set. Especially in early spring. Due to the gradual warming of the weather and changes in the outdoor environment, gas-fired generator sets need to have an adaptation process. Moreover, due to the strong wind in winter, parts are prone to aging, so all aging parts should be replaced. The specific inspection items are as follows:
1. Carefully check the gas generator set to ensure that there are no “three leakage” problems, namely: oil leakage, water leakage, gas leakage and so on. Ensure the firmness of the wire connection.
2. Ensure the lubricating oil level of the gas generator set. If it is insufficient, it should be supplemented with lubricating oil of the same brand and quality.
3. The voltage of gas generator set should be between 24-27v.
4. Check the coolant level to ensure that the coolant is sufficient.
5. The emergency stop switch should be in the open state, so that it can pop up automatically in case of an accident. Ensure the fault protection of gas generator set.
6. Ensure that the output switch is in the off state and cannot be started with load.
Post time: Jul-20-2022